Victron Energy

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Pump auto start/stop with Color Control GX ======


===== Introduction =====

The CCGX has a relay - switch - which can automatically start a pump. The switch is triggered by 'tank level' data, received from a tank-sender. The level at which the switch is automatically tripped is user-definable.
==== Boat & Motorhome overview ====

An additional Overview page is available which shows at-a-glance status information from all tanks connected to the CCGX. To enable the tank overview page from the main menu go to: Settings -> Display and language -> Show boat and motorhome overview. You will now find that 'Mobile' has been added to CCGX 'homepage showing: 'Overview' and 'Tiles'. 

It is also posible to change Multi/Quattro AC current limit and mode when those functions are available.

{{:drafts:mobileoverview.png?direct|}}


==== Enable pump start/stop ====
To enable the pump start/stop functionality go to Settings ->Relay; and set the function to "Tank pump". 

{{:drafts:pumpstartstop-relay.png?direct|}}
==== Configuration ====
Once enabled the tank pump configuration page will be found at: Main Menu ->Settings ->Tank pump.

{{:drafts:pumpstartstop-config.png?direct|}}

==== Mode ====

  * **Auto:** Start and stop the pump based on level settings
  * **On:** Pump always on
  * **Off:** Pump always off


{{:drafts:pumpstartstop-modes.png?direct|}}

==== Tank sensor ====

Select which sensor will be monitored to start/stop the pump when the "Auto" mode is enabled. 

{{:drafts:pumpstartstop-list.png?direct|}}


==== Pump auto-start levels ====


**Start level:** When the tank level reaches this value the pump will be started.

**Stop level:** When the tank level reaches this value the pump will be stopped.